Only paid pros’ who power wash should acquire a heated pressure washer. Even though the lower end ones are good they are still quite expensive.
In addition the electrical cost and water usage in GPM will be really high. Not to mention that there is very little that could possibly be in a home that would need a heated pressure washer for.
Some of the most affordable ones are around 2000 dollars. And that’s a 1,200 PSI machine which by itself can only do so much.
How Hot Water Pressure Washers Clean Better and Faster
It is a good machine if you want to clean any kind of grime or oil from industrial surfaces. That means any type of industrial grime and oil often found in factories, farms, and many construction sites.
In addition to that it works well for food grade grease and oil in kitchens, bakeries, restaurants (especially here).
The hot water makes the grease more active on a microscopic level. The hot water is able to penetrate all the grease and grime braking it up then carrying it away.
Whereas water and the oils from the buildup wouldn’t normally mix, the higher temperatures see to it that it isn’t a problem.
The water in these units are usually heated by carbon fuels: diesel, gas, fuel oil, natural gas or propane, etc.
However there are of occasions where some are electrically heated. The electric models however are not very popular.
What to look for when buying one
A heated pressure washer should have several things.
It should be able to heat water to near or above boiling point. That is near 1000C/212F.
It should have a pressure near 2000PSI and at least a 2.0GPM. This is the best combination to remove oil and grime.
It should have safety features to remove excess heat and pressure in case of an emergency.
Finally it should have a heat insulated handle and at least 50 ft. of hose.
Everything else is optional.
Lets take a look at some of the products on the market
Shark 3,000 PSI 3.5 GPM Honda Gas Powered Hot Water Pressure Washer
The Shark 3,000 PSI 3.5 Gas Powered Hot Water Pressure Washer is a heated pressure washer that is ideal for a professional.
The heated pressure washer delivers at 3000 PSI and 3.5 gallons per liter. This is a powerful machine. These stats place the machine in the mid–ranged washer category.
The power of the machine doesn’t have to be much higher than this as it is enough to get the job done. This is enough to clean and sterilize practically all industrial and commercial surfaces properly and cleanly.
The item is made from stainless steel so as to prevent rust.
It has an insulated hand grip and four wheels that are over 10 inches in width making it able to maneuver over almost any terrain.
It has a temperature setting which is good for precision control.
Pros:
- 4 wheels that are pneumatic
- Insulated handle
- Temperature control
- Stainless steel design
- Comes attached on a frame to keep it stable and up right
- High PSI
Cons:
- Doesn’t have safety release valves (though the stainless steel design makes up for this and keeps the whole thing contained)
Shark 2,400 PSI 2.7 GPM Subaru Gas Powered Hot Pressure Washer
This item has delivers a 2,400 PSI output and a 2.7 GPM. This is enough to get most jobs done. It can efficiently and effectively clean practically any surface you can think of whether commercial or industrial.
It is still meant for professional use as the cost of using it is just so high. From the gas used for pumping and heating to the water usage. Only commercial use would make it feasible.
The item has insulated handle grip made of heat resistant plastic so your hand doesn’t burn.
The coil wrap and design is made of stainless steel to withstand the harshest conditions of heat and pressure.
It comes on 4 pneumatic wheels that won’t ever puncture. This allows it to maneuver over almost any terrain and gives it some amount of mobility.
It comes on a trolley. The design also seems to be more compact than similar models.
The price for it is $ 4,000
Pros:
- Compact design
- Insulated handles
- Stainles steel design consistent throughout.
- 4 wheels and trolley design.
Cons:
- No safety valve feature (though the stainless steel design makes up for this and keeps the whole thing contained)
If you don’t want to spend a lot of money on a new heated pressure washer, you can use this pressure washer pump for your old pressure washer to turn it into a heated one: 2700 PSI Pressure Washer Pump
John Deere offers a wide variety of light to heavy duty pressure washers. John Deere asserts that they take cleaning seriously with heavy-duty frames that ensures their pressure washers won’t vibrate and cause premature wear and tear.
John Deere pressure washers also happen to be made compatible with some of their other items such as tractors so that you can haul them around as you wish.
The PSI of John Deere pressure washers usually varies from 2400PSI to 3000PSI. This is because they target the mid-range market and produce items that can be applied to the widest possible amount of uses.
Therefore if you want to own a pressure washer a John Deere pressure washer is a good place to start.
It is also something of note that John Deere uses engines produced by other brands such as Honda and Mi-T-M therefore they are retailers of pressure washers and not wholesale.
It is essential to know that John Deere don’t tend to sell John Deere pressure washers over Amazon. However they do sell parts or components such as a pump. One such item is discussed below.
The New 2700 PSI PRESSURE WASHER WATER PUMP John Deere HR-2410GH is a pump that can be placed in other pressure washers.
It is very versatile and is able to fit a lot of other pressure washer brands including: KARCHER, GENERAC, BLACKMAX, CRAFTSMAN, BRIGGS, HONDA and more.
The 2.4GPM output is also excellent for higher end washing projects.
The item has a thermal release valve as well as mount bolts space that will allow it to be fit firmly into most modular designed pressure washers.